Home > Solar & Accessories > Solar Packages > Off Grid Solar Packages >

3.3KW off grid solar package
3.3KW off grid solar package

Bin Location: 667

Availability:: May need to be ordered / Limited stock
Product Code: 8.5KWH-FLO


3.3kW Off Grid Package

12 x 275W Jinko Solar Panels

Specifications (per panel)

Rated Power (watts): 275
Open Circuit Voltage (volts): 39.2
Maximum Power Voltage (volts): 32.0
Short Circuit Current (amps): 9.18
Maximum Power Current (amps): 8.61
Temp. Range: -40 to +85°C
Maximum System Voltage: 1000 V DC (IEC)
Maximum Series Fuse Rating: 15 A
Power Tolerance: 0/+3 %
Cell Technology: Mono-crystalline
Number of Cells: 60 (6 × 10)
Size (mm): 1650 × 992 × 40mm
Warranty: 10 Years Material & Workmanship; 25 Years Performance to 80%
Weight: 19.00kg
275W Jinko Solar Panels

48V Victron EasySolar MPPT / Inverter

All-in-one solar power solution

The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. Simply connect the battery cables and solar cables and you’re done!

The EasySolar unit incorporates the following hardware in a single enclosure:

  • Multiplus Compact 48V / 3000VA Inverter / 35A charger (for Genset)
  • Bluesolar MPPT 150V / 70A solar controller
  • AC Circuit Breakers and RCD
  • PV Array Combiner (Three sets of MC4 PV connectors)

The solar charge controller: Blue Solar MPPT 150/70

Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.


  • Ultra-fast Maximum Power Point Tracking (MPPT)
  • Advanced Maximum Power Point Detection in case of partial shading conditions
  • Battery Life: intelligent battery management by load shedding
  • Automatic battery voltage recognition
  • Flexible charge algorithm
  • Over temperature protection and power de-rating when temperature is high

Victron MPPT Solar Controller

The inverter/charger: MultiPlus Compact 48/3000/70

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.

AC distribution

The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available.


Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.

Color Control GX

The Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained - almost anywhere in the world - by accessing your Color Control GX using our free-to-use Victron Remote Management Portal.

At a single touch, Color Control GX provides an instant overview of your system: battery state of charge; present power consumption; power harvest from PV; power provision from mains/generator.

Victron Remote Management (VRM) provides you with full access to the very extensive controls and settings of all system-components which are connected to either your CCGX or Venus GX. It allows remote user and installer login - from anywhere, at anytime. This powerful application also provides for hassle-free diagnostic checks and analysis of archived information.

The Color Control GX can be programmed to auto-start your generator - triggered by low-voltage; high-demand; or battery state of charge. It can be further tailored to delay ignition until the end of 'quiet' periods - avoiding accidental nuisance at dead of night.

A Remote Console feature is available. It's like carrying the front face of your CCGX control panel around on your phone, or other device.

Color Control GX
Victron EasySolar

Clenergy Solar Panel Roof Racking System

Easy Installation

A versatile rail, Z-module and splice kit eliminates the need for onsite cutting, making SolarRoof a safe and cost effective PV mounting system.

Great Compatibility

Designed as a univarsal PV mounting system, SolarRoof is compatible with most of the major framed and frameless PV modules on the market.

Versatile Application

With a full range of roof hooks and brackets, this system is suitable for most roofing types, including pitched tile roofs, metal roofs, concrete roofs and even slate roofs.

High Quality

Strict quality control in accordance with ISO 9001 over materials and finished products ensures optimum strength and long life for your installation.

10 Year Warranty

Clenergy provides a 10 year product warranty for your peace of mind.

Clenergy Roof Racking System

Cable & Fusing

6mm Solar Cable
50M (With MC4 Connection)

2 x 25A
DC Breaker
Breaker Housing
MC4 Connector Pairs
4 × Spare

Battery Disconnect
/ Fuse Holder

FH1 Battery Fuses
2 × 160A
SD Card
Wifi Module
(for CCGX)
50mm˛ Battery Cable
(5M Red + 5M Black)
Battery Lugs
(8 × 50/10) & (4 × 50/8)
Rooftop DC Isolator
(2 × 2 IN 1 OUT)





Roof Isolator

Roof Pipe



Inlet (15A)

Please see our range of Off grid Solar Batteries here

SunGEL48V,400Ah, 19.2KWh, Battery bank BYD B-Box 10kWh Package - IP20 Cabinet
SunGEL48V,400Ah, 19.2KWh, Battery bank  BYD B-Box 10kWh Package - IP20 Cabinet