You are here: Home > 48V DIY Offgrid Prewired Boards - Features

48V, Prewired Offgrid Board - Features

Technical Information
System Voltage 48V 48V 48V 48V
Max Solar Input(Watts) 2.0KW 4.0KW 4.0KW 5.7KW
Max Solar Input (Voltage/Current) 150V / 35A 150V / 70A 150V / 70A 150V / 100A
Suitable for Daily Consumption of Up to 4.0KWh/Day Up to 8.0KWh/Day Up to 8.0KWh/Day Up to 11.0KWh/Day
Inverter / Charger 3KVa / 35A 3KVa / 35A 5KVa / 70A 5KVa / 70A
Warranty 5 Years


Plug & Play

This pre-wired Offgrid Power sytem board already has all the complex connections between the equipment connected for you, so you do not have to worry about running cables & wires, thus providing easy installation. The only two connections you have to make to get your system up and running are

  • Connect the Solar Panels to the Victron MPPT Solar Charge Controller
  • Connect the Battery cables to the Disconnect switch
  • The AC distribution board also comes with a manual change over switch to by pass the inverter and the batteries (if required) to run your equipment through a generator

Victron MPPT Solar Controller

A Solar Controller should be able to get the maximum out of a solar panel. In order to do so, a Controller should be able to choose the optimum Current-Voltage point on the Current-Voltage curve which is the Maximum Power Point. Victron MPPT Solar Controller does exactly that. As the name suggests Maximum Power Point Tracking (MPPT) Solar Controller provides ultra-fast Maximum Power Point Tracking (MPPT), especially in case of changing light conditions and cloudy skies. MPPT controller also provides advanced Maximum Power Point Detection in case of partial shading conditions. An ultra-fast MPPT controller like the Victron MPPT Solar Controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Victron MultiPlus-II Inverter / Charger

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.

DC Circuit Breakers, Disconnect Switch & Fuses

DC miniature circuit breakers Ex9BP are designed for direct current, thanks to their polarity independency, especially for photovoltaic aplications where some failure can change the polarity of the voltage. 1 and 2-pole versions to 250 and 500 V DC are suitable for general DC applications and small PV systems, 3 and 4-pole breakers with rated voltage to 750 and 1000 V DC mainly for bigger photovoltaic applications. Devices are offered with rated current up to 63 A, rated breaking capacity 6kA (Ex9BP-N) or 10kA (Ex9BP-H), tripping characteristic C and K.

The Circuit Breakers are Present between
  • Solar Panel & MPPT Solar Regulator

Industrial fuses are designed to protect installations and equipment against overload and short-circuit currents on low voltage electrical circuits. NH fuses are rated at AC690V - 50kA, DC250V - 100kA. NH fuse switch disconnectors are used on low voltage electrical systems that require high protection against shortcircuit while securing on load circuit disconnection and isolation.

Victron Color Control GX Monitor

The Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained - almost anywhere in the world - by accessing your Color Control GX using our free-to-use Victron Remote Management Portal

Online Monitor Overview Product Information