Our complete pre-wired DIY Offgrid Power sytem is an affordable and easy way to install your own offgrid / stand alone systems as the inverter, solar charge controller & all the other required power conversion & safety equipment are mounted on to a formply board and all the complex connections between the equipment connected for you, so you do not have to worry about running cables, thus providing easy installation. The only two connections you have to make to get your system up and running are
Connect the Solar Panels to the Victron MPPT Solar Charge Controller
Connect the Battery cables to the Disconnect switch
Since all the packages have voltage strings less than 120V (Extra Low Voltage), these systems are perfectly safe to be a DIY install, which means they can be installed by anybody even without an electricians license. We also provide a Certificate of Compliance for the pre-wired Formply board and all the AC components on the pre-wire board from our qualified electricians.
The other great feature about our complete DIY stand alone solar power system package is that The AC distribution board also comes with a manual change over switch to by pass the inverter and the batteries (if required) to run your equipment through a generator.
With the victron color control monitor you will get an EXCELLENT view of how much power is left in your batteries, how much power you are currently using & how much solar you are currently producing. We will also be able to remotely monitor and make changes to your system if you face any difficulties by accessing the color control through the victron online portal called the VRM. This makes the whole system almost completely autonomous.
Sun shines on the solar panels, generating DC electricity that is fed into a regulator (MPPT). The regulator controls the amount of charge deep cycle (solar) batteries receive. 12-volt appliances can be run directly off the batteries or the current routed through an inverter which converts it to AC electricity; suitable for running standard home appliances.
Please note. These systems are designed for stand alone applications and will not feed power back if connected to the grid. Please see our
Grid & Hybrid Battery Packages here if you are connected to the electricity grid and need a solar system.
DIY Offgrid Solar Packages
1.6KW Package
6 x 275W Jinko Panels
Victron 3KVA Inverter / Charger
Victron 150V/35A MPPT Controller
Victron Color Control Monitor
Normally: $6,499.00
On Sale: $5,999.00 Supply Only Price does not Include Batteries