Forbes Batteries & Electronics is your Local one stop shop in Toowoomba & Darling Downs for all your Victron BlueSolar PWM Controller requirements. We at Forbes Batteries have a wide range of PWM Controllers always on stock.
BlueSolar PWM-Light Charge Controller
Load output with low battery voltage disconnect function.
Lighting control function, one timer only.
Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.
Three stage battery charging (bulk, absorption, float), not programmable.
Load output protected against over load and short circuit.
Protected against reverse polarity connection of the solar array and/or battery.
BlueSolar PWM-Duo Charge Controller
PWM controller
Charges two separate batteries. For example the starter battery and the service battery of a boat or mobile home
Programmable charge current ratio (standard setting: equal current to both batteries)
Charge voltage settings for three battery types (Gel, AGM and Flooded)
Internal temperature sensor and optional remote temperature sensor
Protected against over current
Protected against short circuit
Protected against reverse polarity connection of the solar panels and/or battery
BlueSolar PWM-Light 48V Charge Controller
Load output with low battery voltage disconnect function.
Lighting control function, one timer only.
Seven segment display for quick and easy setting of the load output functionality, including timer setting.
Three stage battery charging (bulk, absorption, float), not programmable.
Load output protected against over load and short circuit.
Protected against reverse polarity connection of the solar array and/or battery.
BlueSolar PWM-Pro Charge Controller
The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable
With help of a computer and software (available free of charge from Victron's website)
With the dedicated BlueSolar Pro Remote Panel (see features below).
Lighting control function, fully programmable.
Three stage battery charging (bulk, absorption, float), fully programmable.
Integrated battery monitor function (Remote Panel needed to display state of charge).
Load output with low voltage disconnect and manual control (default setting)
Optional external temperature sensor.
Load output protected against over load and short circuit
Protected against reverse polarity connection of the solar array and/or battery.
